#ati_netft_ros_driver
This is the driver for the ATI NET/FT box that is used to connect to ATI F/T sensor. This repo is ported from https://code.ros.org/svn/wg-ros-pkg/stacks/netft/trunk. It has been catkinized and updated for ROS Indigo. This ROS driver only supports communciation with the NET/FT device using the Raw Data Transfer (RDT) protocol (using UDP packets) over Ethernet. The NET/FT box can also be interfaced using Ethernet/IP or CAN but these modes are not supported by the ROS driver.
Use the ROS node in the package as a stand-alone node for publishing F/T information. E.g.:
rosrun netft_rdt_driver netft_node --address 192.168.1.1
The NET/FT box defaults to 192.168.1.1 as its ip address but this can be changed using the browser-based interface.
See a more detailed tutorial here: http://wiki.ros.org/netft_rdt_driver/Tutorials/RunningNetFTNode
For applications that require to read from the netft in real-time, there is an implementation that uses a hardware_interface::ForceTorqueSensorInterface and a force_torque_sensor_controller::ForceTorqueSensorController from ros_control along side with OROCOS to achieve such behaviour.
This implementation is based in this rtt_ros_control_example.
There is a convenient launch file:
roslaunch netft_rdt_driver netft_rrt_controller.launch ip_address:=192.168.1.1
For more insights regarding this implementation please read this useful discussion.